Temperature/Vibration Chamber

Long duration product exposure to constant random frequency operational vibration and non-operational vibration to simulate rugged road conditions.  Simultaneous temperature cycle and vibration exposure are also conducted for additional data that is relevant to detecting potential material/component weaknesses and calculating product life expectancy.

Electrostatic Discharge

The last thing you need is for your radio to quit due to accidental static shock. That’s why our products go through the extensive Electrostatic Discharge Test on all exposed control areas as well as I/O connections so they can withstand the most severe static build up. Shocking, isn’t it?

Load Dump

Severe electrical environments are relatively common mobile applications. We understand these environments and what it takes to protect electronics that will be exposed to them. That’s why all of our products include specific and significant front-end circuit protection and filtering that is proven to withstand the toughest electrical environments. The Load Dump Tests puts destructive pulses (spikes) to simulate the sudden disconnection of the battery from the alternator while the alternator is generating current to load the battery. Such Load Dump pulses are high energy pulses with a high potential of destruction ensuring that our electronics are protected.

DC Voltage Overstress

Uses a power supply, applies 18 VDC for 5 minutes. For Heavy Duty products:  Applies 24 VDC for 5 minutes to simulate a vehicle that is jumpstarted.

Reverse Polarity

The Reverse Polarity test uses a car battery to test the durability of the product when the (+) and (–) cables are accidentally reversed.

Power Line Noise Rejection

Test throws noise onto the signal and simulates product reaction to alternator whine.

Simulated Crank Start Voltage

Used to test electronics depreciation and altercations when vehicle is turned on.

High/Low Operating Voltage Test

Both tests used to ensure electronics consistency when vehicle battery goes below or above the normal 12V.  Product must remain operational throughout the test.

Shorted I/O

Ensures that product will function when inputs and outputs are connected improperly to the product.

High/Low Operating Temperature

Long-Duration product exposure to operational temperature extremes and rapid temperature cycles that are experienced in outdoor mobile applications. In addition, we test for High humidity introduced at high-temp to test the effectiveness of circuit corrosion protection (conformal coating).

Pushbutton/Hinge/Mechanism Durability Cycle

Inductive Load Switching

Tests product well above and below the average waveform to ensure that it can withstand the extreme fluctuations.